Installing a sliding door is an excellent solution for saving space while adding a modern touch to your interior. With an appropriate hardware kit, installation is accessible to most DIY enthusiasts, even beginners.

Discover the 5 essential steps for successful sliding door installation.

---

Step 1: Prepare measurements

Before you begin, check:

• the width of the opening;
• the height of the door;
• the space available above it.

The track must be long enough to allow the door to open completely.

---

Step 2: Install the track

Using a spirit level, draw a perfectly horizontal mark.

Drill the fixing holes, install the appropriate wall plugs, then securely fix the track.

This step is essential to ensure smooth and silent sliding.

---

Step 3: Mount the rollers

Attach the rollers to the top of the door in accordance with the manufacturer's instructions.

Tighten each fastener correctly to ensure perfect stability during movement.

---

Step 4: Install the door on the track

Gently lift the door and engage the rollers in the track.

Then install the end stops to prevent the door from coming off the track during use.

---

Step 5: Adjust the final details

Check the door's alignment and make any final adjustments if necessary.

Open and close the door several times to check that the sliding is smooth, without friction or jamming.

---

What equipment is needed?

To install a sliding door, you will need:

• a complete hardware kit (track, rollers, stops, and screws);
• a drill-driver;
• a spirit level;
• a tape measure;
• a pencil.

A 200 cm sliding door hardware kit is an ideal solution for installing a single door. It includes all the necessary components to achieve a robust, smooth, and durable system.

---

Our advice

• Always check the strength of the wall before fixing the track.
• Use wall plugs appropriate for the material (plasterboard, brick, concrete...).
• Check the level several times before final tightening.
• Regularly clean the track to maintain silent sliding.

---

FAQ

Can I install a sliding door myself?

Yes. With an appropriate hardware kit and a few tools, installation is accessible to individuals.

---

Which track should I choose for a sliding door?

The track must be compatible with the weight and dimensions of the door. A complete kit including track, rollers, and stops simplifies installation.

---

How long does it take to install a sliding door?

Allow generally between 1 and 3 hours, depending on your DIY skill level and the type of support.

---

Conclusion

Installing a sliding door is a simple project that saves space and modernizes a room. By following these 5 steps, you will achieve a reliable and durable installation. To facilitate installation, the use of a complete hardware kit is recommended for a robust track, smooth sliding, and secure fastening.