12V Cordless Impact Driver, High Torque, 1/4 Inch Hex Chuck

Designed for construction sites and quick maintenance interventions, this 12V cordless impact driver delivers high torque for demanding screwdriving and light bolting. With a no-load speed of up to 2200 rpm and a 1/4" hex chuck, it drives stainless steel screws, lag bolts, and self-drilling screws without overheating. Ideal for tradespeople, electricians, drywallers, and installers, it combines compactness, controlled power, and consistent work rate throughout the day.

Main features

• Impact torque ≥100 N·m: removal of rusted screws, quick wood/metal anchors.
• Speed ​​0–2200 rpm ±10%: precise control from start to final tightening.
• 1/4" hex chuck": instant bit change, zero key.
• Fast charging ≤60 min via 13.5V 2.0A charger: continuous availability.
• 1.8 m charging cable (VDE): safe connection on workshop and construction site.
• Low standby power consumption: optimized energy between two interventions.
• 12V format: reduced weight, easy access at height and in confined spaces.

Compatibility & materials

Compatible with standard 1/4" hex bits (25/50/89 mm), socket adapters, and light-duty hex drill bits. Ideal for solid/laminated wood, thin metal, profiles, brackets, TF/TT/SHCS screws, self-drilling screws, and light-duty bolts. Recommended for framing, decking, light metalwork, furniture, and HVAC systems.

Technical table

• Tool voltage: 12V (cordless)
• No-load speed: 0–2200 rpm ±10%
• Torque (static locking, 5 s impact): ≥100 N·m
• Charger input: 100–240V~ 50/60Hz, 0.8A
• Charger output: 13.5V, 2.0A
• Plug: VDE | Cable length: 1.8 m
• Tool no-load current: <3.5A | Standby: ≤30 µA

Why the pros love it

• Measurable time savings on structural screwing and series.
• Less torque feedback at the wrist thanks to the impact.
• Versatility on site: from equipment assembly to finishing work.
• Fast availability: charges in 1 hour to move seamlessly between tasks.

Package contents

• 12V impact driver, 1/4" hex chuck
• 13.5V 2.0A charger (VDE plug), 1.8m cable
• User guide

Tips & Safety

• Use impact (torsion) tips to preserve the impression.
• Start slowly, then gradually increase the speed to avoid messing up.
• Wear safety glasses/gloves; clear the chip ejection area.
• Do not prolong the static impact beyond a few seconds.

FAQ

• What size bits? Standard 1/4" hex.
• Suitable for lag screws? Yes, within the recommended 12V range and pre-drilling according to the type of wood.
• Does it drill? With hex drill bits, for light drilling.
• The difference compared to a drill? The impact driver screws faster and limits torque feedback.
• Charging time? Approximately ≤60 min with the charger provided.
• Use for metal? Yes, for self-drilling screws and light bolts.